Adjustments; Navigating The Menu; Adjusting The Brightness And Contrast - Sony Trinitron HMD-A230 Manual De Instrucciones

Adjustments

Navigating the menu

1
Press the center of the Joystick to display the main
menu.
,
the resolution of the current
input signal (only if the signal
matches to one of the
recommended VESA timing
modes).
2
Move the joystick m/M to highlight the main menu you
want to adjust and press the center of the Joystick.
,
3
Move the joystick m/M to highlight the sub menu you
want to adjust. Then move the joystick </, to make
adjustments.
4
Main menu
the horizontal
60 . 0kHz / 75Hz
1024 768
and vertical
frequencies
of the current
input signal
Sub menu
S I ZE / CENTER
,
2 6

Adjusting the brightness and contrast

Brightness and contrast adjustments are made using a separate
BRIGHTNESS/CONTRAST menu. These adjustments are
effective for all input signals.
1
Move the joystick in any direction to display the
BRIGHTNESS/CONTRAST menu.
2
Move the joystick m/M to adjust the brightness (
and </, to adjust the contrast ( ).
BR I GHTNESS / CONTRAS T
2 6
Note
If you set the brightness and contrast level to "0", the picture will black out
and no picture will appear.
),
2 6