Cleaning The Filter Element; Replacing The Filter Element - Stihl SE 61 Manual De Instrucciones

Refit the upper part of the vacuum
cleaner
Clean the edge of the container
N
Refit the upper part of the vacuum
N
cleaner
Clean the sleeve and intake port
N
before fitting the suction hose
SE 61, SE 61 E

Cleaning the filter element

Close slide on hand tube
N
Switch on machine
N
Press the opening of the hand tube
N
firmly against the flat surface of the
upper part of the vacuum – this will
seal the opening of the hand tube
(as shown in the picture)
Press the filter cleaning button 3
N
times
Dust deposits are removed from the filter
element.

Replacing the filter element

Unplug the power plug from the
N
socket
Remove upper part of vacuum
N
cleaner and turn it over
Turn the cover (1) in the direction of
N
the arrow and remove it
Remove filter element (2) and
N
dispose of it in accordance with the
statutory regulations
Check correct operation of the float:
N
the float must move easily when the
upper part of the vacuum cleaner is
turned over
Fit new filter element in the reverse
N
sequence of steps
Refit upper part of the vacuum
N
cleaner
English
29