Setup And Installation - Nikken PIMAG DELUXE Manual De Instrucciones

1. Remove all components from the packaging. Compare with
the diagram (Figure 1) to make sure that all the components are present.
Figure 1

SETUP AND INSTALLATION

2. On your faucet, remove the aerator by rotating it
counterclockwise (seen from below) as shown in Figure 2.
Adapter kit
3. If your faucet has male threads, thread the diverter valve
(6) onto the faucet using the thin gasket (8). See Figure 3.
If the connection is incompatible — the threads do not
match — connect using the adapter kit provided. Do not
overtighten.
Housing assembly
5
Battery and battery tray
Lid assembly
PiMag filter cartridge
(item #13152)
Existing faucet
Diverter valve
Diverter pin
Figure 2
Figure 3