Lwds Function (Lane Change Warning) - wikango WK900 Manual Del Usuario

It is necessary for its correct operation to select in the menu the mode
of warning sensitivity that you want, between:
Low sensitivity> Normal sensitivity> High sensitivity
On the other hand, the connection with satellites must be completed,
since this system will activate only when the speed of the vehicle
exceeds 60 km / h.
Once the vehicle or nearby frontal obstacle is detected, the device will
emit a warning sound and an alert icon will appear on the screen to
warn the driver.
It is suggested to set the height of the device in - Automobile / Sedan:
110cm or SUV: 140 cm.
6.2 LDWS function
The Lane Departure Warning System LDWS (Lane Departure Warning
System) needs to be configured on the 4/7 screen of the
settings menu. Once activated and configured, it will notify you in an
audiovisual way of the lane changes that the vehicle makes warning of
possible road exits or accidents due to careless attention.
It is important to follow the following conditions:
(1) The vehicle must have a connection with GPS satellites.
(2) The image must be in the center and aligned with the rails as
shown in the image.
(3) The blue center line should be aligned with the middle of the 2
lanes. The superior and the inferior.
The ends should not be blocked by a frontal object.
(4) The blue horizontal line must be aligned with the
Horizontal line of the road in the distance.
ENGLISH I 58