Listen From An Auxiliary Device; Adjust Brightness Of Led Display - Nyne N-19 Manual Del Usuario

Tip:
•
Listen from an auxiliary
device
Through this clock radio speak-
er, you can listen to music
from any auxiliary device with
a 3.5mm headphone socket,
such as a PC or an MP3 player.
1
Connect the supplied
3.5mm audio cable.
•
•
EN
22
NYNE_N-19_User Manual_A6_V1.1_20120406.indb 22
After the device stays at a
preset radio frequency for
ten seconds, the screen
returns to normal clock
display. To display the cur-
rent radio frequency again,
press Source once.
one end to the AUX in
socket on the back of the
device
the other end to the 3.5mm
headphone socket on an
auxiliary device
2
Press repeatedly to
Source
select the AUX source.
+
The AUX source icon (AUX)
is displayed at the lower
right corner of the screen.
3
Start music play on the
auxiliary device.
Adjust brightness of LED
display
Note:
•
You can only adjust the
screen brightness in time
mode.
1
Press repeatedly to
Source
select the time source.
+
The set clock is displayed
on the screen.
2
Press repeatedly
Snooze
to adjust the brightness of
screen display.
+
The brightness level
changes in the order of
100% (default) -> 75% ->
50% -> 25% -> Off.
4/6/2012 11:07:06 PM