Sunbeam 1629-020 Manual De Instrucciones página 3

Secador de cabello montaje en la pared con cordón retractíl
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

H
D
F
AIR
RYER
EATURES
Plug-In Model 1629-020
Hardwire Model 1629-040
4
O
PERATING
This dryer is equipped with an Appliance Leakage Current Interrupter (ALCI) for your
safety. This device is designed to make the appliance inoperable under some abnormal
conditions (such as accidental immersion in grounded water).
After the appliance is plugged in, you must check your protective device as follows:
1. Press the "Reset" button on the ALCI device.
2. Press the "Test" button. The "Reset" button will pop out. This verifies that the
protective device is working properly.
3. Press the "Reset" button once more to reactivate the safety device and use
your appliance.
REPEAT THE ABOVE PROCEDURE BEFORE EACH USE TO CONFIRM
THAT THE PROTECTIVE DEVICE IS OPERATING.
If your protective device does not operate as described above, please contact your
Authorized Sunbeam dealer.
For your protection, this unit contains a thermostat that prevents the dryer from overheating.
Should the air intake and/or air outlet become blocked or obstructed, the hair dryer will
automatically shut off. If this occurs, slide the switch to "OFF," unplug and allow dryer
to cool. If dryer continues to turn off automatically, discontinue use and contact your
Authorized Sunbeam distributor.
T
U
O
SE
1. Remove handset from base unit and pull handset cord to desired length – max length
is 5.5 feet.
2. Hair dryer will turn-on automatically when the on/off button on the handle is pressed
and held.
3. When finished, return handset to base unit.
4. Press cord retract button to retract cord into base unit.
C
F
:
ONTROL
EATURES
a. Power settings:
• Low – low air, low heat
• Medium – high air, medium heat
• High – high air, high heat
b. COOL SHOT on all power settings – eliminates heat
c. Retractable cord button
d. Night light switch
C
AUTION
Use your Sunbeam hair dryer with care. Directing a high volume of heat continuously to
one area can overheat hair and scalp. When using a "HIGH" heat setting, hold the blower
opening a few inches away from the hair, drying one section at a time. Work layers of hair
in quick strokes. Keep the dryer in motion until drying and styling are complete. .
I
NSTRUCTIONS
5
Tabla de contenido
loading

Este manual también es adecuado para:

1629-040

Tabla de contenido