Operating Elements - Olympia UV 585 Manual De Instrucciones

Operating Elements

UV 589
UV 585
2
Functions
The range of functions is dependent on the machine
concerned.
UV lamp (UV 585, UV589)
Bank notes are provided with distinguishing features
which can be rendered visible under UV light. In the
case of counterfeit bank notes, all areas light up and not
just the sections which contain the UV signatures.
Place the bank note in the machine.
Check the features (see
The features are clearly visible.
Please observe that older bank notes cannot al­
ways be conclusively identified as forgeries under
UV light due to external effects.
8
3
1 2
3
1 and 2).
Magnetism (UV 589)
Bank notes are provided with magnetic features applied
by means of special ink. These features can be verified
using a magnetic scanning sensor [1].
Place the bank note in the machine.
Press the bank note firmly onto the magnetic sensor [1]
and move the bank note back and forth quickly (see
5).
The machine issues a short acoustic signal when the
corresponding features are detected.
White light (UV 589)
Bank notes are provided with distinguishing features
which can be rendered visible under white light. All the
features appear on authentic bank notes and are de­
scribed in 6.
Move the switch [2] to its front position.
The machine switches from UV to white light.
Place the bank note in the machine.
Check the security features under white light
(see 6).
The distinguishing features are clearly visible.
Magnifying glass (UV 589)
Bank notes are provided with distinguishing features
which can be rendered visible under a magnifying glass.
Place the bank note in the machine.
Check the features (see
The microprints are highly detailed and easily detect­
ably.
Operation
Switching the UV lamp on and off
Switch the UV lamp on and off using the switch [3].
On
UV 589
Move the switch [2] to its rear position.
Wait for about one minute after switching the machine
on for the lamp to heat up to its optimum operating tem­
perature.
If the machine will not be used for a longer period,
disconnect it from the power outlet.
The machine is equipped with a pivoting support on the
rear side which enables it to be set at an
G
4)
Off
angle.