Features; Assembly - Homelite UT46510 Manual Del Operador

PRODUCT SPECIFICATIONS
Input .................................................................................................................................... 120 V, 60 Hz, AC only, 8.5 Amps
Weight ....................................................................................................................................................................... 28.5 lbs.
KNOW yOUR CULTIvATOR
See Figure 2, page iii.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
This new product has been shipped in a partially as-
sembled condition as described below. Carefully check
the packing list below to ensure all items are included in
the package; the packing list describes all loose items
that are not assembled to the product as shipped. Do
not operate the product if any packing list items are
already assembled to your product when you unpack it.
Call the customer service number below for assistance.
Operation of a product that may have been improperly
preassembled could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
PACKING LIST
Cultivator
Drag stake
Adjustment Knob
Hitch Pins (2)
Felt Washers (2)
Inner Tines (2)
Outer Tines (2)
Wheels (2)
Wheel Washers (2)

FEATURES

SWITCH LOCK-OUT
The switch lock-out prevents accidental starting of the
cultivator.
SWITCH TRIGGER
The switch trigger starts and stops the rotation of the
tines.

ASSEMBLy

Wheel Hitch Pins (2)
Front Handle
Handlebar Bolts (2)
Knobs (2)
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
tool until the parts are replaced. Failure to heed this warn-
ing could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is com-
plete. Failure to comply could result in accidental starting
and possible serious personal injury.
ASSEMBLING THE HANDLEBAR
See Figure 3, page iii.
 Loosen the two handlebar knobs.
 Unfold the handlebar into operating position.
NOTE: Do not use force. If there is binding, continue
to loosen the knobs. Do not allow the switch cable to
become pinched when raising the handlebar.
 Retighten the handlebar knobs.
Page 8 — English