Gram IF 4000 Manual De Uso página 339

3-18 Programming and Parameters
A058, 18 "Above PF Ang"
A061
Options
(Cont.)
19 "Anlg In Loss"
20 "ParamControl"
A059 [Opto Out1 Level]
A062 [Opto Out2 Level]
32
32 bit parameter.
Determines the on/off point for the opto outputs when
7, 8, 10, 16, 17, 18 or 20.
A058 & A061 Setting
6
7
8
10
16
17
18
20
Values Default
Min/Max:
Display:
A064 [Opto Out Logic]
Determines the logic (Normally Open/NO or Normally Closed/NC) of the opto outputs.
A064 Option Opto Out1 Logic
0 NO (Normally Open)
1 NC (Normally Closed)
2 NO (Normally Open)
3 NC (Normally Closed)
Values Default
Min/Max:
Display:
• Power Factor angle has exceeded the value set in
A062 [Opto Outx Level].
• Use A059 or A062 to set threshold.
Analog input loss has occurred. Program
Loss] for desired action when input loss occurs.
Enables the output to be controlled over network
communications by writing to
Level].
(0 = Off, 1 = On.)
A059 & A062 Min/Max
0/400 Hz
0/180%
0/815 Volts
0/100%
0.1/9999 Secs
1/9999 Counts
1/180 degs
0/1
0.0
0.0/9999
0.1
Opto Out2 Logic
NO (Normally Open)
NO (Normally Open)
NC (Normally Closed)
NC (Normally Closed)
0
0/3
1
A059 or
A058 or A061 [Opto Outx Sel] is set to option 6,
A059 or
A122 [Analog In
A062 [Opto Outx