Wash System; Drying System; Overfill Protection Float - Haier ESD300 Manual Del Usuario

Drying
Lights up when the dishwasher is drying after the final rinse.
Clean
Displayed when a wash cycle is complete. The light will remain ON until door is
opened.
Sanitized
Displayed when cycle has met sanitization conditions. The light will remain ON
until door is opened.
Add Rinse Aid
Fill the Rinse Aid dispenser when Add Rinse Aid is lit.A rinse aid prevents water
from forming droplets that dry as spots or streaks. If the Rinse Aid dispenser is
empty, the light glows when you select a cycle or while a cycle is running.
Wash System
The five-level wash system provides excellent cleaning results. Three levels of
filtration and a soil collector system filter the wash water and prevent food
particles from redepositing on the clean dishes.
. The wash water continuously flows through the filter, trapping food particles.
. Two water jets, located under the spray arm, remove the food particles from
the filter.
. A coarse strainer prevents bones, pits, and other large objects from entering
the pump system.
NOTE: Periodically check the coarse strainer and remove any objects on the
strainer.
Drying System
During drying, you can see hot vapor escaping through the vent at the upper left
corner of the door.This is normal as the heat dries your dishes.
IMPORTANT:The vapor is hot. Do not touch the vent.
Overfill Protection Float
The overfill protection float ( in the front right corner of the dishwasher tub )
keeps the dishwasher from overfilling. It must be in place for the dishwasher to
operate.
Check under the float for objects that may keep the protector
from moving up or down
23