Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Overview of the components
1.
Pushing bar
3.
Juice net
5.
Clamp
7.
Main machine
Before use
1. Remove all packaging of the device.
2. Check if the voltage of the appliance corresponds to the main voltage of
your home. Rated voltage is AC220-240V 50Hz.
3. Place the device on a flat stable surface and ensure a minimum of 10 cm.
free space around the device. This device is not suitable for installation in a
cabinet or for outside use.
4. Remove the clamp with a downward motion.
5. Remove the lid of the device. The juice jug is stored in the pulp container.
6. Remove all loose parts of the machine and clean it thoroughly before first
use. These loose parts are also dishwasher safe.
7. Place the device on a flat clean surface. The device is equipped with anti-
slip feet, so your device is stable and will not slip easily.
Operation
1. Prepare the processing fruits and vegetables as follows:
a. Only use fruit and vegetables that are properly ripened, otherwise the
filter will block up quickly. Wash or peel the fruit or vegetables.
b. Fruits with large seeds or stones should always have these removed first.
Those with small seeds (such as apples and pears) can be processed
whole, including the skin and core.
c. Fruits with thick rinds (such as citrus fruits, melons, kiwis and beetroots)
should be peeled first before processing.
d. Fruit with a thick skin (such as citrus, melons, kiwi, beets), the skin must
be removed before they can be processed. Always remove the thick
stalks from grapes. In the case of leaf vegetables (such as spinach), the
leaves should be rolled up firmly and then push through the filling shaft.
e. Always cut fruit and vegetables into pieces small enough to pass
through the filling shaft.
Instructions for use
2.
Transparent cover (lid)
4.
Juice collector
6.
Pulp container
8.
Juice jug
English
3
Tabla de contenido
