Disassembly For Elbow Connector - Interroll DM Serie Instrucciones De Montaje

26
Interroll Drum motor DM series connecting cable
Removing the connecting cable

Disassembly for elbow connector

To differentiate the motor variant with plug from the motor variant without plug, the locking
screw is marked with a plug symbol.
1 Plug
2 Assembly nipple
3 Assembly sleeve
4 Intermediate socket
4 Completely unscrew the thrust screw (8) with the 20-mm open-end wrench.
4 Ensure that the blue seal insert (7) is pulled off the shell nipple (6).
4 Completely unscrew the shell nipple (6) from the intermediate socket with the 14-mm
open-end wrench.
4 Loosen the locking screw (5) and push the intermediate socket (4) off the assembly sleeve (3).
4 Completely unscrew the assembly nipple (2) from the shaft end with the 14-mm open-end
wrench. Ensure that the assembly sleeve (3) and the cable do not turn in the process.
4 Pull the plug (1) with the cable out of the permanently installed socket in the shaft.
2 3
1
5 Locking screw
6 Shell nipple
7 Seal insert
8 Thrust screw
Translation of original instruction manual
4
5
6
7
8
Version 2.0 (06/2018) en