Reliable digital velocity Instrucciones De Uso página 4

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Thank you for choosing the RELIABLE Velocity iron. With its unique
Compact Vapor Generator (CVG) it will allow you to obtain the benefits of
professional pressing combined with the advantages of traditional ironing.
ATTENTION
Before using your Velocity iron, remove all the paper or plastic bags,
plastic sheets, cards and possible stickers that may be on the outside
or inside of the appliance that acted as handling protection or sales
promotion material.
Read these instructions before first using the iron.
Do not plug it in without checking that the voltage of the iron is the
same as your home power.
Check that the socket outlet has a suitable ground connection.
Take care that the iron cord does not touch the hot parts of the appli-
ance.
If you are going to iron with steam, refer to the section "Before Starting
To Iron" to extend the life of the independent steam chamber.
To fill the iron or refill it during ironing, follow the instructions set out in
the section "Before Starting To Iron," unplugging it from the main power
and using the accompanying water jug.
Do not worry if the iron gives off a little smoke during first use. It will
soon disappear.
Do not spray "vertical" steam on a garment hanging in the wardrobe
or on a person. Vertical ironing (steaming) must be done with the gar-
ment on a hanger and away from people or animals.
Stand the V95 in the vertical position resting on its heel when storing.
It is advisable to use a stable ironing board.
When you finish ironing, always empty the water from the tank. If you
want to drain it while ironing, always unplug the appliance from the
main outlet first.
To disconnect the CVG, never pull on the power cord, take out the plug.
If the power cord is damaged; to prevent risks, have it replaced at an
A.S.S. (After Sale Service) authorized by RELIABLE, as special tools are
needed.
The V95 should not be used if it has been dropped or has a crack or
leak in the water tank. If you observe any of these problems, take the
iron to Reliable Corporation or an authorized service depot.
Do not leave the appliance in operation unattended. Keep it out of the
reach of children.
4
MAIN COMPONENTS AND ACCESSORIES (Fig 1)
1. Water filler hole cap
2. Spray outlet
3. Spray button
4. Water tank
5. Removable anti-scale filter
6. Non-slip legs
7. LCD display (Fig 2)
a) Temperature change indicator
b) Temperature selected
c) Steam selected
d) Water filling indicator
e) Anti-scale filter icon
f) Automatic Auto-Pause icon
g) Steam On/Off switch
h) On/Off & temperature selector button
i) Steam flow selector button
8. Water jug
BEFORE STARTING TO IRON
With your Compact Vapor Generator unplugged from the main outlet,
open the filler hole cap Fig 3 (1) by turning it backwards (see arrow).
Due to the importance of keeping the Compact Vapor Generator's
internal system in proper condition, it is always recommended to use
the best quality of water available to you. If you are unaware of the hard-
ness of the water in your home, ask your local council for information.
WATER INSTRUCTIONS
The following is a list of the best water for your Velocity iron in order of
preference:
Distilled water
o
Softened water (from a household water softener)
o
Filtered water (counter top unit or store bought)
o
Tap water
o
Fill the tank, without exceeding the maximum level, with the water jug
supplied Fig 1 (8), keeping the iron in the vertical position, resting on
the non-slip rear cover legs Fig 3 (6). When the tank is full, close the
cap.
5
Tabla de contenido
loading

Tabla de contenido