Batch Function - Premier MC-5363 Manual De Instrucciones

3. Operation Instruction
3.1) THE RIGHT WAY TO LOAD THE BILLS
Please load the bills in the machine the same as the following steps.
3.2) Working modes description
3.2.1Counting Function
Once the bills are correctly placed in the hopper, the machine will start counting automatically. The
number of counted bill will be shown on the counting display. Moreover, once the bills are removed from
the stacker, the counting display will clear and the batch display in turn will show the previous number of
bills counted.
Bills should be placed correctly into the hopper as described the following steps:
a. Place the bills between the counting guides as shown in figures 1 and 2.
b. Swiftly push the top of the bills backward with a finger (see figure 3) to make them rest on the top
of the hopper plate in the correct counting position.
The machine mode could be changed from automatic and manual. Power up the machine, the display
will shows "AUTO" means the machine is in automatic mode. In automatic mode, the user simply places
the bills in the hopper and the machine detects the bills and starts counting automatically. Press and
hold the RESTART
manual mode. In manual the user must manually press " RESTART " to begin counting each time.
3.2.2 Addition Function
Addition can be performed by pressing the "ADD" key. in this case, removing the counted bills from the
stack will not clear the quantity counted. The next bill placed in the hopper will be counted and added to
the preceding quantity. The total amount of added bills will be shown in the display. Press the "ADD"
button to close the function and clear the count.

3.2.3 Batch Function

--Batch function can be performed by pressing the "BATCH" key. ( when the display will show
"BATCH "). By default the batch number is set to 100. Press the
through the preset amount of 100, 50, 20, 10 and 0 (unlimited). Batch display shows batch quantity.
You can customize the batch amount to values between 1 and 100 by pressing the "+" or "-" key .To
cancel the function, keep pressing the BATCH until the indicator is off .
--Under batch counting mode, the machine stops when counted bill quantity reaches the preset batch
key for 3 seconds, the display "AUTO" will disappear means the machine is in
NOTE
" BATCH " key again to toggle
P-5