Safety Symbols; Important - Workzone AJ54 Manual Del Usuario

1/4 Sheet Sander · 2.0 AMP

Safety Symbols

IMPORTANT: Please read all of the safety and operating instructions carefully before using this
tool. Some of the following symbols may be used on your tool. Please pay particular attention
to all sections of this User Guide that carry warning symbols and notices. Proper
interpretation of these symbols will allow you to safely operate the tool.
1. To reduce the risk of injury, operator must read and understand User Guide before
using this tool.
2. This symbol indicates there is a danger of serious personal injury or death if you do
not observe the warning.
3. Volts
V
4. Amps
A
5. Hertz
Hz
6. Alternating current
~
n
7. No-load speed
0
.../min or
8. Revolutions or oscillations per minute
-1
...min
9. Do not expose to rain or use in damp locations.
10. Always wear safety goggles or safety glasses with side shields and a full face shield
when operating this tool.
11. Wear dust mask.
12. Wear ear protection.
13. Always wear nonslip, heavy-duty protective gloves when operating this tool.
14. Always wear nonslip safety footwear when operating this tool.
15. Double insulation
16. WARNING! Always turn the tool off and disconnect the electrical power before
conducting inspection, cleaning and maintenance. Remove the plug from the outlet
immediately if the cord is damaged or cut.
3
[email protected]
Safety Symbols
AFTER-SALES SUPPORT
1855 399 9415