Components; Getting Started - Heathrow Scientific SEA STAR Manual De Instrucciones

Components

Power on/o switch
6
Speed control knob
LCD
Timer control knob

Getting Started

1. Remove the contents from the package, examining them carefully for breakage,
defects, or missing parts. Save the packaging.
WARNING!
Do not lift shaker by the platform.
2. Place SEA STAR™ on a sturdy, level surface away from the edge of the counter
and other moving equipment. Allow 3" of clearance around the unit for platform
movement, accessory attachments, and user convenience. Make sure the power
cord is clear of hot surfaces and other hazards.
CAUTION!
If the top platform becomes jammed, it will not rotate. Keep platform free and
clear of obstacles.
3. Verify that the power switch is in the OFF position. Plug the power adapter cord
into the rear of the shaker. Select the appropriate power cord, attach to power
adapter, and plug into an appropriate, grounded outlet.
WARNING!
Do not operate shaker with a damaged electrical cord.
Note:
— Leave shaker disconnected when not in use.
4. Turn power switch ON.
5. Rotate speed control knob counter clockwise until display reads 20 rpm. Press
speed control knob once to turn shaker on. If there is a smooth whirring sound
and the platform accelerates with little or no vibration, SEA STAR™ is ready
to use. If there are loud or unusual sounds, or excessive vibration, DO NOT
OPERATE. Contact Heathrow Scientific® LLC Technical Support.
6. Before filling a container or vessel, it is recommended to test stability. Secure
vessel on platform in middle position.
7. Press speed control knob once to turn on shaker. Make sure the vessel will not
tip, teeter, walk, or slide to assure safe mixing.
8. Fill vessels for shaking. Vessels should contain a stopper or be covered to
prevent spills.
9. Secure all vessels.
Notes:
—Do not operate with an unbalanced load.
—Partial loads should be centered to evenly distribute weight over bearings for longer shaker life.
7