Technical Data - Heathrow Scientific SEA STAR Manual De Instrucciones

21. Do not shake flammable, explosive, or corrosive materials.
22. Do not operate in a hazardous or flammable environment.
23. Do not use any solvent on the unit that may attack plastic or cause damage.
24. Do not shake materials where the transfer of mechanical energy to glass could
cause glass breakage.
25. If shaking action will result in the evolution of gases or fumes, carry out the
operation in a well-ventilated laboratory hood.
26. Ensure the unit is protected from corrosion and mechanical damage. The unit
must be cleaned with a pH-neutral cleaning liquid.
27. Always work in a manner, which endangers neither the user nor any other
person.
28. Should the instrument fail to work to specification, immediately stop shaking.
Clean and troubleshoot the instrument according to the instructions under
"Trouble Shooting" before any further use of the instrument. Contact an
authorized dealer or the manufacturer if trouble persists.
29. Disconnect from power supply before servicing or cleaning.
30. Do not stop platform while unit is turned ON. Doing so may cause the unit to
fail and will void the warranty.
31. Only use original manufacturer's accessories (power adapter, platform, and
bungee cords) and spare parts.
32. Repairs are to be performed by trained and authorized service personnel only.
Contact Heathrow Scientific® LLC Repair Dept Technical Support.
33. Opening the instrument housing or improper use of the instrument voids the
warranty. If there is a failure during the warranty period, contact Heathrow
Scientific® LLC for warranty service.
34. Do not use units that have not been correctly installed or repaired.
35. Do not attempt to disassemble or modify.
36. Store at room temperature in a dry area. Do not expose to sunlight, moisture,
or extreme temperatures or conditions for prolonged periods of time.
4

Technical Data

Speed: 20 to 300 rpm
Orbit diameter: ¾" (19mm)
Max load: 10 lbs
Timer: 0 to 49 hours 23 minutes (2963 minutes) or continuous
Operating conditions
Temperature: 40 to 104ºF (4 to 40ºC)
Humidity: 20 to 80% RH, non-condensing
This unit is intended for use indoors only.
Power: 100 to 240 VAC, 50/60 Hz;
Interchangeable adapter plugs for U.S./Japan/Taiwan,
Continental Europe/Israel, Australia, and United Kingdom
Dimensions
Platform: 11 x 11" (28 x 28 cm)
Overall: 12 3/8 x 7 3/16 x 12" (31.5 x 18 x 30 cm)
This mark is the confirmation that the unit conforms to the applicable
EU directives and has been tested according to the Electromagnetic
Compatibility Directive 2004/108/EC, and to the Low Voltage Directive
2006/95/EC.
Conforms to: ANSI/UL Std. 61010-1, Certified to: CAN/CSA Std. C22 No.
61010-1, CENELEC EN 61010-1.
RoHS
Conforms to EU directive 2002/95/EC (RoHS) and EU directive 2003/11/EC.
Manufacturer
Heathrow Scientific LLC
620 Lakeview Parkway
Vernon Hills, Illinois 60061, USA
www.heathrowscientific.com
Disposal Responsibilities:
The equipment you purchased may contain hazardous substances that could impact the environment.
Per regulations on electronic devices in the European Community, you must use the appropriate disposal
systems to avoid exposure of these substances to the environment. The disposal systems will reuse or
recycle hazardous materials from your equipment responsibly.
The crossed-out wheeled bin symbol invites you to use those systems.
If you need more information on the collection, reuse and recycling systems, please contact your local
or regional waste administration. You can also contact us for more information on the environmental
performance of our products.
Authorized Representative
EMERGO EUROPE
Molenstraat 15
2513 BH, The Hague Tel: +31 (0)70 345 8570
The Netherlands Fax: +31 (0)70 346 7299
5