Technical Characteristics; Maintenance; Fcc/Ce Warning - Extel O’MOUV Instrucciones De Uso

5. TECHNICAL CHARACTERISTICS

- Power supply: 5V
- Consumption: 1000 mA.
Sensitivity to light: 0.5 lux
- Infrared LED: 10 infrared diodes.
- Camera objective: 1/4'' CMOS colour
- Camera view angle: 60°
- Rotation angle: H120° V350°
- Resolution: 640*480 pixels (300,000 pixels)
- WIFI standard: IEEE 802.11b/g
- Operating temperature: approximately 0°C to + 55° C.
- Dimensions: 105 x 140 x 130 (mm) l*d*h

6. MAINTENANCE

The guarantee is void if parts have been dismantled. Clean the outside with a soft, dry cloth only. Before
cleaning, disconnect or switch off the video surveillance system.
WARNING
Do not use any carboxylic acid, alcohol-based or other similar product or solvent. In
addition to the risk of damage to your device, fumes are also dangerous to health and
are explosive.
Do not use any tool which may conduct electricity (metal brush, pointed tool or other)
to clean the equipment
If required, our technical site is at your disposal: www.cfi -extel.com
The latest version of the instructions in colour is downloadable from: www.cfi -extel.com
WARRANTY TERMS
This appliance has a parts and labour warranty in our workshops.
The warranty does not cover: consumables (batteries, etc.) and damage caused by: incorrect use, incorrect
installation, third party intervention, deterioration through physical impact or electric shock, dropping, or
atmospheric phenomena.
• Do not open the appliance as this will void the warranty.
• When returning the appliance for eventual servicing, protect the screen to avoid scratches.
• Clean using a soft cloth only, do not use solvents. The guarantee is void if parts have been dismantled. Clean
the outside with a soft dry cloth only. Before cleaning, disconnect or power off the appliance.
The shop receipt or invoice is the proof of the purchase date.

7. FCC/CE WARNING

Comment: This equipment has been tested and found compliant with the limits of a class B appliance, in
compliance with applicable European standards. These limits are designed to provide reasonable protection
from interferences in a residential installation. This equipment uses, and can transmit radio frequency energy
and, if not installed and used following instructions, can cause interference to radio communications.
However, there is no guarantee that the interferences will not occur in a specific installation. If this equipment
causes interferences to radio or TV reception, which can be determined by powering the equipment on and
off, the user is encouraged to attempt to rectify the interferences using at least one of the following methods:
• Redirect or move the receiver antenna
• Increase the distance between the equipment and the receiver
• Connect the equipment to a socket on a different circuit than the circuit the receiver is connected to
CFI EXTEL O'MOUV - 10/2015
GB16