Steinberg SBS-KW-300AW Manual De Instrucciones página 13

4. CALIBRATION applicable to scale models SBS-KW-300AW, SBS-KW-300AB and
SBS-KW-300AR
Item Operations
Press
and keep pressing for 1 second.
Press
simultaneously,
and keep pressing for 1
second.
Press
digital. Press to move
flashing digital. Input Calibration
Password.
Press
If Calibration Plug is required,
open scale, short cut P2, before
this action.
EN
Full Scale
Press
parameter. Press
to change Full Scale.
Resolution
Press
parameter. Press
Resolution.
Decimal
Press
Point
Point parameter. Press
to change Decimal Point.
Display Notes
SETUP
simultaneously,
P0000
P8416 Password:
to increase flashing
8416
CLbrt
to confirm password.
to enter Full Scale
E 1
to go to Resolution
to change
Pt 0 0: XXXXX
to go to Decimal
1: XXXX,X
2: XXX,XX
3: XX,XXX
24
Item Operations
Gravity
Press to go to Gravity
parameter. Press
flashing digital,
press to move flashing
digital, input gravity where scale
is calibrated.
Zero Calibration
Press to go to Zero Calib-
ration.
Load1 Calibration
Keep
scale with no load and stable.
Press to confirm weight, and go
to Load1 Calibration.
Press HOLD
UNIT to select weight.
Press to confirm weight.
If FUL is selected, calibration
ends automatically. If hLF is selec-
ted,
go to Load2 Calibration.
Load2 When Load2 is not neseccesary
Calibration
please press the button
in order to leave the calibration
maually. In any other case press
the button
weight and finally leave the calib-
ration.
Display Notes
09,794
to increase
LoAd0
----- hLF =
50% F.S.
FUL =
100% F.S.
FUL
-----
End
to confirm the
25
EN