Polar W.I.N.D. Manual Del Usuario página 5

Speed Sensor Teaching
The training computer has to be coded to the
Speed Sensor i.e. taught to receive speed and
distance data. This enables exercising in a
group without interference from other sensors.
The training computer and sensor that come
with the product set have already been
synchronized but teaching is necessary when
you start using a new sensor or if you use other
bike settings than sulky 1.
Install the speed sensor to your sulky as advised.
Before you start teaching, make sure that there
are no other speed sensors or training computers
nearby (40 m / 130 ft). The procedure only
takes a few seconds. You can teach one sensor
for each sulky.
Settings > Sulky > Sulky 1/2/3 > Speed
Select
Select On/O and On to turn the speed on.
Teach new sensor?
Press OK.
•
Select YES to con rm teaching. Rotate the
wheel a few times to activate the sensor. The
ashing red light indicates that the sensor is
activated.
teaching process is over. The training
computer is now ready to receive speed and
distance data.
•
Select NO to cancel the teaching. The
teaching is cancelled and the training
computer resumes contact with the previous
sensor.
To return to Time mode, press and hold the
BACK button.
Completed
is displayed.
is displayed once the
E N G L I S H
.
3