Remote Control Optional - Resfriar CLIMATIZADOR S6 Manual Del Propietário

Model R3 (analogical):
• INTERNAL (CABINET) LAMP INTENSITY CONTROL: (If equipped)
Press the internal lamp button
brightness will vary in 5 levels. Release the button when you get the
best intensity for your convenience. This new selection will be kept in
memory inside the Control Panel, then every time you light the lamp it
will show the same intensity level.
• SLEEP PROGRAMMING: Turn on the fan
continuously on to inform that the fan is in operation but still the sleep
is without programming. Press the sleep button
once to inform that the sleep is programmed for 1 hour. Press again the
same button 3 and the lamp
3
time is for 2 hours. If you need more time for Sleep, you can program
this function up to 5 blinks (or 5 hours).
2 8 9
1 10
4 5 6
2 during 5 seconds, then the lamp
2
7 , then the red led is
7
3 , the led
3
10 will blink twice showing that the sleep
10
3 11
4
2
3
5
Remote Control
Optional
7
If the button 3
3
the sleep function is not programmed. To get a new programming, just
follow the steps above mentioned.
Note: If the fan is stopped using the button
programming will be automatically off.
• WATER FUNCTION: To on/off the water function (ventilation with
cooling process) press the button
showing the function is on. If the green led
means that the water function is in operation, but the injection pump
is not working.
10 blinks
10
The green led
and the injection pump is working too.
Note: When the fan starts, automatically the water function starts
working.
Control Panel / Remote Control Functions:
1 - Remote control IR receiver
2 - On/Off internal lamp (cabinet)
3 - Sleep programming
4 - On/Off water injection
7
5 - On/Off the external placard
12
6 - Off/Decrease the fan speed
6
7 - On/Increase the fan speed
Not
for R3
command
8 - Lack of water (yellow) signal lamp
9 - Water injection working signal lamp (green)
10 - Fan on and Sleep on signal lamp (red)
11 - External placard on signal lamp
12 - On/off fan (function only in the remote control)
is pressed again, the led 10
10
4 . The green led
4
9 blinking means that the water function is operating
9
will stay on to show that
6 all the sleep
6
9 will lights
9
9 is continuously on, it
9
23