Control Panels; Sleep Function; Alarm Clock - Resfriar CLIMATIZADOR S6 Manual Del Propietário

2. Control Panels

R4 Model (digital):
• INTENSITY CONTROL
Press the inner light button
brightness will vary in 5 levels. Release the button when you get the best
intensity for your convenience. This new selection will be kept in memory
inside the Control Panel, then every time you light the lamp it will show
the same intensity level.
• ALARM CLOCK: To program the time to wake up, hold pressed the
button 5 during 3 seconds. The symbol
5
the time showed in the display
use the buttons 17 and 19 .
17 19
When you make a pause for more than 5 seconds without pressing any
button, the display will return to the standard settings.
1 5 6
2 3 4 8 7
12 13 14 15 16 17
FOR INNER CAB LIGHT: (If equipped)
4 during 5 seconds, then the lamp
4
15 will blink so you can verify if
15
is the correct one. To adjust it again,
10
9 10 11
12
4
11
13
Remote Control
by grade
18 23 19 20
21
• SLEEP FUNCTION: It's possible to program the time the fan will turn on/
off. To program the sleep function you must program the alarm clock first,
then press again the button
LI will appear in the display to inform you are programming the turning on
time. If you press the same button again, the display will show DE indicating
the turning off time. When you make a pause for more than 5 seconds
without pressing any button, the display will return to the standard settings.
To turn on the sleep function, press the button
appear in the display.
Note: Using the sleep function, the fan will turn on in the same speed
when it was turned off. If you turn on using the button
start in the minimum speed.
Control Panel / Remote Control Functions
1 - Bar graph showing the fan speed
2 - Fan on symbol
3 - Fan speed showed in numbers
4 - On/off inner light button
5 - Clock, alarm and sleep
19
programming button
22
6 - Sleep on symbol
17
7 - Returning pump working symbol
9
8 - Injection pump working symbol
9 - On/off alarm clock button
10 - 24 hours digital clock
11 - On/off sleep button
12 - On/off water function button
13 - On/off outter light
. The symbol will blink and the symbol
5
, then the symbol
11
19
19
14 - Water function on symbol
15 - Alarm clock activated symbol
16 - Symbol to fill the tank with water
17 - Off/reduce fan speed button
18 - Temperature in °C
19 - On/increase fan speed button
20 - Remote control IR receiver
21 - Battery charge bar graph
22 - On/off fan button (exclusive
function for the remote control)
23 - External light on symbol
will
the fan will
21