Technical Data - Zamel BULIK II PRO Serie Manual De Usuario

WIRELESS PLUG-IN DOOR CHIME
BULIK II PRO DRS-995
I. TECHNICAL DATA
* Avoid monophonic sounds.
** Use cards formatted according to the FAT32 file system. It is best to use cards with
a capacity of up to 16 GB.
*** The range applies to an open area. It has been achieved using an innovative signal
modulation method. Such a large range means that this door chime will work out in difficult
conditions, such as a large number of walls or other obstacles that can significantly
reduce the range of radio signal inside buildings.
• Rated voltage: 230 V AC
• Rated frequency: 50 / 60 Hz
• Rated power consumption:
0.65 W – standby
<2 W – when melody is played
• Transmission: radio
• Frequency: 868 MHz
• Coding: variable code
• Melodies: 14 pre-loaded melodies
+ expandable if you upload any sound as
MP3 file to a microSD memory card*
• Noise level: max. 80 dB
• Volume control: yes – 6 levels
• Optical signalling of operation: yes
– green LED
• Additional AMBILED backlight: yes
– LED RGB (can be turned off)
• Warning when button battery is low: yes –
AMBILED diode flashes in red
• Compatible with buttons: PDH-250
• Range: up to 1400 m***
• Protection class: II
• Protection rating: IP20
• Operating temperature: 0°C to +35°C
• Dimensions: 115 x 42 x 67 mm
9
**
/