Auto Power - Off Layout - REMA DSD04 Serie Manual Del Usuario

3.4 RESOLUTION LAYOUT
Enter the configuration menu as described in 3.1; with the button or select the heading RESOL and push
 the instrument will display RESOL on the upper part of the display while on the lower the current layout is
visualized. Select the resolution with the buttons or and confirm by pushing : " OK " will be visualized
for some seconds and then you can come back to the first configuration menu; push the buttons andat
the same time to come back to the normal running.
Conf
RESOL
ON
PEAK
TARE
OFF
CAUTION!
By pushing " TARE ", " PEAK " and "HOLD" at the same time you enter the calibration menu. Only authorized
personnel can start this procedure; we tell you to quit the calibration menu immediately by turning off the
dynamometer with ON/OFF key.
rESol
ON
TARE PEAK
HOLD
OFF
Conf
RESOL
5
ON
HOLD TARE PEAK
OFF
38
LBS
ON
HOLD TARE PEAK
OFF
0
HOLD