Alcad 915 Serie Manual Del Usuario página 78

6
At this point, we can now configure the parameters of all the SS modules simply by entering the IP address
of one module after another in the address bar of the browser.
We will again be asked to enter the username and password in order to have access to the program (by de-
fault, User name = alcad; Password = alcad). We type in this information and begin the configuration.
First comes the configuration of the input NIM, i.e. the data from the input satellite transponder that we want
to broadcast. We must power up the LNB to be able to receive the satellite signal; we do this by selecting
On in the drop-down menu of LNB Supply.
En caso de conmutación DiSEqC 2.0 rellenamos los parámetros Satellite , Polarity , Band .
76 - ALCAD IPTV web configurator manual
ENG