Safety Instructions - Alcad 915 Serie Manual Del Usuario

915-SS SERIES
DVB-S/S2 to IP streaming equipment (915-SS) broadcasts multicast streams and TV/radio channels, selected
from a DVB-S transponder (maximum 8), from digital satellite reception, over a TCP-IP network.
TV services broadcast as IPTV streams can be viewed on an individual IPTV receiver or by using video re-
production software.
The SS modules are mounted in an SP-725 19" rack (code 9120136). It is possible to connect up to 9 SS-201
modules, 6 SS-211 modules per power supply unit (FA-310) and 8 modules per power supply unit (FA-312).
Each SS module can handle up to 8 MPEG streams; the IP broadcast, therefore, consists of 8 TV/radio servi-
ces per module.
The SS modules are configured via TCP/IP, using either the HTTP protocol (web browser) or TELNET (virtual ter-
minal).
NOTE: For the combination of streaming modules you need to check the consumption of these modules in the
installation sheets to calculate the exact number of modules that support the power supply devices (FA-310 and
FA-312). Note that the consumption of the modules will be influenced by the power consumption of the con-
nected LNB and CAM introduced in conditional access modules.

SAFETY INSTRUCTIONS

Make all IF and power connections before connecting the equipment to the mains supply. To fulfil safety re-
gulations, the electrical installation must be protected by an differential circuit-breaker.
SS-211 SS-211 SS-211 SS-211 SS-211 SS-211 SS-211
Fig. 1 - Earthing the equipment
Do not remove the covers of the equipment while it is connected to the mains.
44 - ALCAD IPTV web configurator manual
ENG