Bulb Replacement - Duraflame DFI-550-22 Manual De Instrucciones

BULB REPLACEMENT

Tools Required for Assembly
Phillips Head Screwdriver
1
2
3
A406
REMOVE
Clear, 40-watt, E12 socket base light bulb
(candelabra base, B bulb).
Unplug the stove. Remove the screws holding the
stove back panel in place. Remove the back panel to
access the light bulb.
Pinch the spring clip to loosen the spindle, and
gently turn and pull the rubber gromet out of the
spinner motor shaft. Remove the spindle and set
aside.
Remove light bulb and replace. Reverse steps 2
and 1; Replace spindle and re-install stove back
panel into position; be careful to not overtighten the
screws.
8
www.tsicustomerservice.com