Setting The Preflexion - Ottobock Axon Arm Hybrid 12K500 Serie Instrucciones De Uso

6.5 Setting the Preflexion

• The level of AFB compensation (flexion assistance) can be adjusted and adapted to the weight of different
clothing with the dial. Adjustments are easier to make when the forearm is flexed.
• The adjustment mechanism is protected by a slip coupling.
• The hydrodynamic damper of the flexion aid mechanism is designed to counterbalance the weight of the fore­
arm plus Axon-Bus gripping component. Please be sure to stabilise the upper arm component of the AxonArm
Ergo while testing the joint functions.
CAUTION
Lock released during donning, doffing or storing of the extended arm
Injury due to sudden bending of the forearm or the upper arm socket due to released lock.
► The Axon-Bus prosthethic system must always be flexed for donning and doffing.
► The Axon-Bus prosthethic system must be stored in flexed condition.
AxonArm Hybrid 12K500=*, AxonArm Ergo 12K501=*
6) Twist the forearm to the upper arm socket until the
notch on the lamination ring is visible above the
guide of the strap clamp (left picture). Otherwise
the strap clamp will not be able to be inserted (right
picture).
INFORMATION: Ensure the strap is straight and
not twisted.
7) Slide the strap clamp under the lamination ring.
8) Screw the strap clamp in.
Region 1
Minimal compensation that allows natural free swing of
the arm while walking.
Region 2
Compensation increases progressively with flexion of
the arm and decreases during extension.
Region 3
Compensation remains constant. If set correctly, the
weight of the forearm is balanced by the compensation
and the elbow remains flexed.
Region 4
Reduced compensation until flexion stop.
Preparation for Use
Ottobock | 31