Nevir NVR-6041 MDG25 Manual De Instrucciones página 30

18. LOCK FUNCTION FOR CHILDREN
Lock: In waiting state, press " STOP/CANCEL " for 3 seconds, there will be a long "beep" denoting
the entering into the children-lock state; meanwhile, LED will display " "
Lock quitting: In locked state, press " STOP/CANCEL " for 3 seconds, there will be a long "beep"
denoting that lock is released.
19. MEMORY FUNCTION
(1) Press "0/MEMORY" to choose memory 1-3 procedure. The LED will display 1,2,3.
(2) If the procedure has been set, press " START/ +30 SEC." to use it. If not, continue to set the
procedure. Only one or two stages can be set.
(3) After finishing the setting, press "START/ +30 SEC." once to save the procedure and turn back
to the waiting states. If press " START/ +30 SEC." again, it will start cooking.
Example: to set the following procedure as the second memory, that is memory 2. to cook the food
with 80% microwave power for 3 minutes and 20 seconds. The steps are as follow:
a. In waiting states, press "0/MEMORY" twice, stop pressing until the screen displays "2".
b. Press "TIME COOK" once, then press "3","2","0" in order.
c. Press "POWER" once,"PL10" display, then press "8" and "PL8" displays.
d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once then turn back to waiting
states. If you press "START/+30SEC." again, the procedure will be saved as the memory 2 and
operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the procedure need
to reset.
f. If you want to run the saved procedure, in waiting state, press "0/MEMORY" twice, screen
displays "2", then press "START/+30SEC." to run.
20. INQUIRING FUNCTION
(1) In cooking state, press " CLOCK/KITCHEN TIMER ", the LED will display clock for three
seconds.
(2) In the microwave cooking state, press " POWER " to inquire microwave power level, and the
current microwave power will be displayed. After three seconds, the oven will turn back to the
previous state. In multi-stage state, the inquiring way can be done by the same way as above.
21. COOKING END REMINDING FUNCTION
When the cooking is over, the buzzer will sound 5 "beep" to alert user the cooking is finished.
22. OTHER SPECIFICATIONS
(1) In standby state, if the set clock digital tube displays current time, the icon " : " would flash;
otherwise, it shows " 0:00 ".
(2) In setting function state, LED displays corresponding setting.
(3) In working or pause state, LED displays surplus cooking time.
30