eNet
Tecla sensora eNet con receptor vía radio
Priority, sun protection
Priority, twilight
Switch off brightness overs-
hoot
Switch on brightness unders-
hoot
Minimum brightness
Maximum brightness
Hotel function
32582713
J0082582713
0...4
Basic setting: 0
0...4
Basic setting: 0
On, Off
Basic setting: On
On, Off
Basic setting: Off
1...67 %
Basic setting: 5 %
75...100 %
Basic setting: 100 %
On, Off
Basic setting: Off
8/10
Specifies the priority for reca-
lling and removing a scene of
type Sun protection for the
channel.
Specifies the priority for reca-
lling and removing a scene of
type Twilight for the channel.
Allows automatic switch-off
according to the brightness. If
the parameter is On, then the
light controller switches off au-
tomatically when the bright-
ness setpoint is greatly excee-
ded.
Note: This parameter is not
yet active, as a light controller
has not yet been implemen-
ted.
Allows automatic switch-on
according to the brightness. If
the parameter is On, then the
light controller switches on au-
tomatically when the bright-
ness setpoint is greatly un-
dershot. We recommend only
using the parameter in con-
nection with the parameter
"Switch-off on brightness
overshoot".
Note: This parameter is not
yet active, as a light controller
has not yet been implemen-
ted.
Specifies the minimum setta-
ble brightness.
Note: If parameters or scene
values are set to a level lower
than the minimum brightness,
then the system will dim to mi-
nimum brightness.
Specifies the maximum setta-
ble brightness.
Note: If parameters or scene
values are set to a level higher
than the maximum brightness,
then the system will dim to
maximum brightness.
If the hotel function is activa-
ted, the system will dim to
20 % brightness when a
switch-off command is made.
Switch-off is only possible with
a forced position command.
Note: If the minimum bright-
ness is set to greater than
20 %, then the system dims to
the set minimum brightness
when the hotel function is acti-
vated.
15.07.2016