8. Operation
Additional
Hardware and
Software
Item
VIP™ Driver
LED Studio
VIP™ Signal Distributor
(optional up to 24 panels)
PVP™ Rigging Kit
(optional)
Neutrik® etherCON®
Signal Extension
(optional)
Neutrik® powerCON®
Extension
(optional)
PVP™ 2-pack and 8-pack PVP™ S5 2-Pack
VIP™ Media System and
one VIP™ Driver
VIP™ Media System with
ArKaos Media Master
Express + KN and One
VIP™ Driver
ArKaos Media Master
Express + KN
PVP™ Series User Manual, Rev. 4
In addition to the panels, you will need other hardware and software to design, build, and
operate your VIP™ video wall system. The following table summarizes these additional
items—some are required and others are optional.
Description
Interface between the signal source, LED
Studio, and the PVP™ being used
Software application used to design and run
the PVPs comprising the video wall. A PC is
needed
Connects between the VIP™ Driver and the
PVPs to distribute the source signal from the
VIP™ Driver to the video wall when using
more than 24 panels
Provides hardware needed to mount PVPs.
etherCON® Signal Extension, 18 in
etherCON® Signal Extension, 5 ft
etherCON® Signal Extension, 10 ft
powerCON® Extension, 18 in
powerCON® Extension, 5 ft
powerCON® Extension, 10 ft
powerCON® Extension, 25 ft
powerCON® Extension, 50 ft
powerCON® Bare Wire Lead, 50 ft
PVP™ S5 8-Pack
PVP™ S7 2-Pack
PVP™ S7 8-Pack
Rack mountable, video computer system with
the PVP™ Driver and LED Studio software
Rack mountable, video computer system with
the PVP™ Driver and LED Studio software, as
well as ArKaos Media Master Express
Video playback software + KN control
Item Code
Item Number
99090575
VIPDRIVER
99090576
VIPSIGDISTRO
20090598
PVP-RK
19090363
MVPU-SIG18IN
19090364
MVPU-SIG5FT
19090365
MVPU-SIG10FT
19110372
PCEXT18IN
19110373
PCEXT5FT
19110374
PCEXT10FT
19110375
PCEXT25FT
19110376
PCEXT50FT
19110377
PCLEAD50FT
20090579
PVPS5x2
20090571
PVPS5X8
20090580
PVPS7x2
20090572
PVPS7X8
MVPU-MS
MVPU-MSMME
MVPU-MSPRO
Operation
21