Tabla de contenido
Idiomas disponibles
Idiomas disponibles
On-Screen
Display Menu
This allows you to select the Closed Captions
service levels of analog broadcasting to be
displayed. Closed captioning allows you to read
the voice content of television programs on the
TV screen. Designed to help the hearing
impaired, this feature uses on-screen "text
boxes" to show dialogues and conversations
while the TV program is in progress. Captions
will appear on the screen during captioned
broadcasts.
• 001,2, 3, or 4
Dialogues (and descriptions)for the action on the
captioned TV program shows on screen. Usually
CC1 is the most used. CC2 carl be used for
alternate languages if they are being transmitted,
• TEXT1, 2, 3, or 4
Often used for channelguide, schedules,bulletin
board informationfor Closed captions programs,
news, weather information,or stock market reports,
Net all Caption services are necessarilybeing used
by a lV channelduring the transmission of a Closed
Caption program.
This allows you to configure the way you
choose to view digital captioning. Select one of
the digital service channels made available by
the caption provider. There are six standard
services. Service 1 is designated as the Primary
Caption Service. This service contains the
verbatim, or near-verbatim captions for the
primary language being spoken in the
accompanying
program audio. Service 2 is
designated as the Secondary Language Service.
This service contains captions in a secondary
language, which is a translation of the captions
in the primary Caption Service. The other
service sub channels are not pre-assigned.
It is
up to the discretion of the individual caption
provider to utilize the remaining service
channels.
You can output digital audio to an AV amplifier
or similar device whose DIGITAL AUDIO INPUT
terminal is connected to the DIGITAL AUDIO
OUTPUT terminal on the TV. Please select an
audio output format compatible with the audio
format of the program you are watching and
the equipment connected.
PCM: The optical output terminal outputs
audio signal in PCM form. If your digital
audio system does not support Dolby
Digital, select "PCM".
Dolby Digital: The optical output terminal
outputs audio signal in Dolby Digital form. It
reproduces sound from surround program
of digital.
Off: Disables digital audio output.
The Auto Sync. is only available when the input
source is PC and your TV is receiving a
computer signal. Select Auto Sync. for
adjusting the settings automatically.
, Be sure to connect
the PC to the TV and switch it
on before starting "Auto Sync.".
Ordinarily you can easily adjust the picture as
necessary to change image position using
"Auto Sync.". In some cases, however, manual
adjustment is needed to optimize the image.
H-Pos." Centers the image by moving it to
the left or right.
V-Poso" Centers the image by moving it up
or down.
Clock: Adjust when the image flickers with
vertical stripes.
Phase: Adjust when characters have low
contrast or when the image flickers.
, The default cursor position may not be in the center, because
the screen position variable ranges may be asymmetrical.
, The screen position variable ranges depend on the View Mode
or the signal type. The ranges can be seen on the position
-setting screen.
This function sets the terminal to output the
computer audio.
The adjustment items vary depending on the
input source. Select the input source
corresponding
to the terminal connected to the
PC and then adjust the desired item.
(D" 30
Capítulos
Tabla de contenido
