Watching Tv; Turning On/Off The Power; Initial Installation - Sharp AQUOS LC-50LE650U Manual De Operación

Watching TV

Turning On/Off the Power

POWER (On/Standby)
Press POWER on the TV or on the remote control unit to turn
the power on.
• The Initial Installation starts when the TV powers on for the fi rst
time. If the TV has been turned on before, the Initial Installation will
not be invoked. For changing the settings of the Initial Installation,
perform "EZ setup" on the Initial Setup menu on page 28.
Press POWER on the TV or on the remote control unit again
to turn the power off.
• The TV enters standby and the image on the screen disappears.
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is
turned off.

Initial Installation

When you turn on the TV for the fi rst time, it will automatically
memorize the broadcasting channels available in the region
where you live. Perform the following steps before you press
POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 9.)
2. Connect the antenna cable to the TV. (See page 9.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
1
Press a / b to select the desired language listed on the
screen, and then press ENTER .
POWER
English
Español
Français
Country
2
Press a / b to select the desired Country listed on the
screen, and then press ENTER .
Time zone
3
Press a / b to select the desired Time zone listed on
the screen, and then press ENTER .
Eastern Time
Central time
Mountain Time
Pacific Time
TV Location
Select "Home" or "Store" for the location where you plan
to install the TV. This product qualifi es for ENERGY STAR
in Home mode default setting.
4
a / b
Press to select "Home" or "Store".
Press ENTER to enter the setting.
Select where the TV will be placed.
the picture will be optimized for
that location.
Home: "Power Saving" is set to "On", and AV MODE is
set to "STANDARD(ENERGY STAR)".
Store: "Power Saving" is set to "Off" and AV MODE is
set to "DYNAMIC (Fixed)".
US
Canada
Mexico
Indiana
Arizona
Home
Store
17