Auto Standby - Vision SB-900P Manual Del Propietário

INSTALLATION

AUTO STANDBY

This product has auto-standby for the AUX and BT inputs.
• It will turn off after 15 minutes.
It will automatically turn on when signal is sensed.
•
• It relies on input sensitivity to do this. Make sure volume on source device is turned up.
DISABLE
Put into STANDBY then hold V+ button until blue light flashes. The blue LED will flash slowly
once. To enable do the same again. The blue LED will flash quickly three times.
6
SB-900P_manual_en.doc