Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7. Operating levels
Switch setting
Switch setting
r
Foil thickness switch
Selector switch
HOT
HOT
COLD
Tip: For high-gloss photos, select the switch setting
"125".
8. Preparing for hot lamination
Insert the pouch guide
on the rear of the laminator.
Fold apart the pouch guide
Insert the laminator power plug into a power
socket.
Ensure the appliance has a stable positioning.
Switch the appliance on by flipping the ON /
e
OFF switch
. The red ON / OFF Indicator
t
lamp
now glows.
Place the selector switch for hot or cold lamination
r
to "HOT".
Only activate the pouch thickness switch
i
when the appliance is switched on.
Shift the pouch thickness switch
sired foil thickness (80 or 125 Micron). The
laminator now heats itself up to the operating
temperature.
•
The laminator has reached its operating
temperature as soon as the green LED
indicator light "Ready"
Laminating foil
i
thickness
80
> 60 - 80
125
85 - 125
125
to 200
q
into the holes provided
q
.
i
to the de-
y
glows.
The attainment of the operating tempera-
ture is indicated through the lighting up of
the green LED indicator lamp "Ready"
y
. For a more uniform laminating result
we recommend, especially for thinner foils
(below 125 Micron) and with adjustment
to a different foil thickness, to first wait an
additional ca. 2-3 minutes before
beginning with lamination.
Lay the document to be laminated into a
laminating pouch of the appropriate size.
Make certain that all corners of the docu-
ment have at least two millimetres of space
to the edge of the laminating pouch, as
shown in Fig. 1. Make certain that you use
only one pouch for laminating. First open
it up, as shown in Fig. 2.
Fig. 1
For information about the lamination
process, please read section 10.
- 20 -
Capítulos
Tabla de contenido
