Koenic KTO 4331M Manual De Instrucciones página 20

English
Clean crumb tray
Regularly remove the crumb tray from the
product and remove the crumbs.
Fig. Unplug and let the toaster cool down.
12
Pull out the crumb tray and remove
the crumbs. Wipe the crumb tray with
a slightly damp cloth if there are heavy
stains. Re-insert the crumb tray.
Caution
Never use the toaster without the crumb tray.
Note
Be sure to re-insert the crumb tray into the
device properly.
The best toasting result
1. Depending on the moisture content of
the bread, the degree of roasting should
be adjusted. Choose a lower level for dry
bread.
2. Choose a higher level for whole grain
bread, fresh bread or loaves with an
uneven surface.
x 4
20
IM_KTO4331M_170420_V03_HR.indb 20
Cleaning and care
Fig.
Never immerse electrical parts of the device
in water during cleaning or operation. Never
hold the device under running water. Never
use solvents and abrasives, hard brushes,
metallic or sharp objects for cleaning.
Solvents are harmful to health and attack
the plastic parts. Abrasive cleaners and tools
do scratch the surface.
Storage
Fig.
3. If only toasting one bread slice, place it
4. Please note that the toast result will be
x 3 x 2
Prior to cleaning, pull the power plug
13
out of the power outlet. Wait until the
device has completely cooled off. Clean
the exterior surfaces of the housing
with a slightly damp cloth.
Caution
Wrap the power cord around the cord
14
stem as indicated on the underside
of the toaster. Store the toaster in a
dry, cool area which is protected from
humidity.
centrally in the toaster and select a lower
degree of toasting.
darker if the toasting is repeated several
times without cooling.
1
20/4/17 12:15 PM