KAYSER SODAsiphon STANDARD Instrucciones De Uso página 15

• The SODAsiphon STANDARD is operated under pressure.
The maximum permissible operating pressure (PS) is
20 bar. Any inappropriate use can result in personal
injury.
• The incorrect operation, overfilling of the SODAsiphon
STANDARD, use of more chargers than the amount
specified and/or exceeding of the temperature will
cause overpressure in the SODAsiphon STANDARD.
The SODAsiphon STANDARD bottle is fitted with a
concave safety base. In the event of an inadmissible rise
in pressure, the safety base bulges partially or fully
outwards, reducing the interior pressure in the bottle.
In such an event, the pressure in the SODAsiphon
STANDARD must be relieved immediately by actuating
the lever. Under no circumstances may it be used again.
• Never force the pressurised SODAsiphon STANDARD
open. When the Kayser unit head cannot be unscrewed
easily, perform the following steps to relieve the
pressure.
• Pressure relief:
Provided the SODAsiphon STANDARD is used correctly
according to the instructions, the pressure can be
relieved without problems by actuating the lever.
When the Kayser unit head cannot be easily unscre-
wed from the emptied unit, there is a risk that the
bottle is still pressurised. If this should be the case,
place the SODAsiphon STANDARD upright on a level
surface, cover the nozzle with a cloth and actuate the
lever until the pressure in the SODAsiphon STANDARD
has been relieved. However, should the Kayser unit
head still be difficult to remove, please contact Kayser.
15
