Operation; Technical Data; Technical Specifications; Guarantee - Speedlink Gravity 2.1 Instrucciones De Manejo

Connection to a video console
In order to connect the Gravity speaker system to a video console you will need the supplied adap-
GB
ter cable from jack to chinch.
Connect the stereo jack of the Gravity audio cable to the stereo bushing of the adapter cable.
Disconnect the white and red chinch plugs from the scart cable which leads to the TV set, and
connect these plugs to the respective white and red bushings of the adapter cable supplied.
Do not use the yellow chinch plug as this plug transmits the video signal to the TV.

2. Operation

Set the power switch On the back of the subwoofer to On. Blue LED's on the front of the

subwoofer indicate that the speakers are ready to operate.
3. Technical specifications
Output power
Frequency range
Dimensions
Power supply

Guarantee

We guarantee this product in respect of workmanship and all built-in components for a period of
two years from date of purchase.

Should you need help...

Our technical support team will be pleased to help with any technical problems. The hotline num-
ber can be found on the back of this manual.
You will find the control buttons for volume, treble and bass on
the right hand side of your subwoofer.
Adjust the volume with the Volume control button.

Adjust the treble with the Treble control button.

Adjust the bass with the Bass control button.

Set bass and treble to the desired value during operation.

You can conveniently adjust the volume with the cable remo-

te control.
To switch Off the speakers, set the power switch on the back

of the subwoofer to Off.
Subwoofer
12 watts RMS
30 Hz to 200 Hz
15,4x33,7x32,5 cm
AC 230 volts, 50 Hz
10
Satellites
2 x 8 watts RMS
170 Hz to 20 kHz
9,4x17,5x12,9 cm