Bushnell ET1626 Manual De Instrucciones página 6

ELEvATIOn AnD WInDAGE T-LOK™ TURRETS
Step 1
Step 2: Use a coin or flathead screwdriver to remove the turret screw found
on top of the turret knob, being careful not to displace the o-ring found under
the turret knob.
Step 3: Remove the turret knob and return it to the turret, with the "zero" mark
on the knob lining up with the vertical index line on the turret.
Step 4: Return turret screw to top of knob and tighten down, making sure the
turret knob is in the locked position so the turret knob does not turn while
tightening the screw.
USInG ThE BTR-2 TACTICAL RETICLE
The BTR-2 reticle in second focal plane is an excellent choice for shooters needing
maximum flexibility in a riflescope. This reticle in the second focal plane combines
an illuminated red dot with a mil hash platform. The center horseshoe provides an
unobstructed aiming point that is effective in both CQB scenarios and if targets
are encountered at longer ranges. At 6.5 magnification power the mil hash vertical
stadia offers 10 mils of elevation, with .5 mil hash marks in between. Additionally
the horizontal stadia can be used for windage holds or to range 10" targets out
Step 2
Step 3
5
Step 4