Nevir NVR-800VMUC Manual De Instrucciones página 39

3. To confirm, briefly press the RECORD button once. 'DEL' will appear steadily in
the Display for few seconds and then the Display will resume to USB/Card
playback stop mode with the total track number deducted by 1.
Original 38 Files
4. Repeat 1-3 above to delete more tracks as desired.
For better playback sound, you can connect the unit to an external Audio Amplifier via the
RCA LINE OUT JACKS located at the back panel. Please proceed as following:
1. Connect the "L" & "R" LINE OUT Jacks and the AUX IN of your Audio Amplifier.
(Connection cable is not included).
2. Select the music source by setting the Function Selector (12) to "PHONO", "USB/SD"
or "TUNER" as desired.
3. Turn on the external Amplifier.
4. Sound will then come out from the system's built-in speakers and the external
Amplifier's speakers simultaneously.
5. Set the INTERNAL SPEAKER SELECTOR to "OFF" and adjust the sound level using
the VOLUME CONTROL on the external Amplifier as desired.
6. Turn the System and the external Amplifier off when you have finished listening.
7. Unplug the connection cable.
This System accepts stereo headphones with a 3.5mm plug and an impedance of 8 ohms
or greater.
Inserting the plug of your headphones into the Headphone jack (21) will enable you to listen
privately.
When using headphones, the speakers will be disconnected automatically.
READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES
1. Avoid extended play at very high volume as it may impair your hearing.
2. If you experience ringing in your ears, reduce the volume or shut off your unit.
3. Keep the volume at a reasonable level even if your headset is an open-air type
designed to allow you to hear outside sounds. Please note that excessively high
volume may still block outside sounds.
NOTE:
LINE OUT OPERATION (OPTIONAL)
USING HEADPHONES (NOT INCLUDED)
After Deleting Track 5
10