Operating Time; Safety Warnings - Makita DML815 Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
LED
Dimensions
(L x W x H)
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1430B / BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injury and/or fire.

Operating time

Battery cartridge
BL1430B
BL1815N
BL1820B
BL1830 / BL1830B
BL1840B
BL1850B
BL1860B
• The operating times in the above table are a rough
guideline. They may differ from actual operating
times.
• Operating times may differ depending on battery
type, charging status, and usage condition.
• Battery cartridge may differ from country to
country.

SAFETY WARNINGS

IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock, and per-
sonal injury, including the following:
Operating time
17 hours
13.5 hours
18 hours
24.5 hours
35 hours
45 hours
54 hours
227 mm x 79 mm x 116 mm (8-15/16" x 3-1/8" x 4-9/16")
0.56 - 0.93 kg (1.23 - 2.05 lbs)
READ ALL INSTRUCTIONS.
1. Do not look into the light, or do not expose the
light to eyes. Eyes may be damaged.
2. Do not cover or clog the lit tool with cloth or
carton, etc. Covering or clogging it may cause a
flame.
3. The tool is not waterproof. Do not use it in
damp or wet locations. Do not expose it to rain
or snow. Do not wash it in water.
4. Do not touch the inside of the flashlight head
with tweezers, metal tools, etc.
Do not give the tool a shock by dropping,
5.
striking, etc.
6. When the tool is not in use, always switch off
and remove the battery cartridge from the tool.
7. Battery tool use and care
• Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to battery pack, picking up or carrying the machine. Carrying the
appliance with your finger on the switch or
energizing appliance that have the switch on
invites accidents.
• Disconnect the battery pack from the
appliance before making any adjustments,
changing accessories, or storing machine.
Such preventive safety measures reduce the
risk of starting the appliance accidentally.
• Recharge only with the charger specified
by the manufacturer. A charger that is suit-
able for one type of battery pack may create
a risk of fire when used with another battery
pack.
• Use appliance only with specifically des-
ignated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
2 ENGLISH
DML815
0.5 W x 4
D.C. 14.4/18 V