Tabla de contenido
Idiomas disponibles
Idiomas disponibles
KCH-240
Hydraulic Cable Cutter
GENERAL SAFETY RULE
TO WORK IN SAFE CONDITIONS WITH THIS TOOL, IT IS IMPERATIVE TO READ
CAREFULLY THE DIRECTIONS FOR USE AND TO FOLLOW THE INSTRUCTION
IT CONTAINS. IF YOU DO NOT RESPECT THE INFORMATION WRITTEN IN THE
INSTRUCTION MANUAL, THE WARRANTY WILL BE CANCELLED.
1. Work area safety
a.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b.
Keep children and bystanders away while operating the hydraulic cable cutter.
Distractions can cause you to lose control.
c.
Do not leave the tool in acidity, alkaline or other corrosive gas or liquid and do
not operate or stock the tool in high temperature to avoid the tool corrosive or
the seal gasket ageing.
2. Personal safety
d.
Stay alert, watch what you are doing and use common sense when operating the
tool. Do not use the tool while you are tired or under the influence of drugs,
alcohol or medication.. A moment of inattention while operating hydraulic tools
may result in serious personal injury.
e.
Use safety equipment. Always wear eye protection. Safety equipment such as
dust mask, non-skid shoes, hard hat, or hearing protection used for appropriate
conditions will reduced personal injuries.
f.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair，clothing
and gloves away from moving parts. Loose clothes jewelry or long hair can be
caught in moving parts.
g.
Do not force the tool. Use the correct power tool for your application .The
correct power tool will do the job better and safer at the rate for which it was
designed.
h.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the hydraulic crimping tool. This tool is dangerous in the hands
of untrained users.
i.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the Hydraulic crimping
tool operation. If damaged, have the Hydraulic crimping tool repaired before use.
Many accidents are caused by poorly maintained power tools.
j.
Use the Hydraulic Cable Cutter accessories and tool bits etc., in accordance with
these instructions and in the manner intended for the particular type of tool,
taking into account the working conditions and the work to be performed. Use of
the Hydraulic Cable Cutter for operations different from those intended could
result in a hazardous situation.
3. Service
Have your Hydraulic Cable Cutter serviced by a qualified service technician using
only identical replacement parts. This will ensure that the safety of the Hydraulic
Cable Cutter Kit is maintained.
www.grupotemper.com
Tabla de contenido
