Richell S Manual De Instrucciones página 4

How to Disassemble
1
. Disassemble connection
Remove Fixing screws.
How to clean
l Wipe off this product with washing cloth after squeezed firmly using a mild detergent and water.
After cleaning, place in a shaded area to air dry to prevent discoloration, warping, rust and mold.
l Do not use a scrub brush and/or a polishing powder as these may cause scratches, rust and/or discoloration
to the product.
l When using creosol or other disinfectants, make sure to dilute them, otherwise damage to the product finish
or discoloration may occur.
l Do not use harsh chemicals such as thinner, benzene or alcohol as these may cause damage/discoloration
to the finish.
Specifications
UPC
Model
Width x Depth x Height (inches)
803840
94944-3
S
94945-0
94946-7
L
94947-4
lPlease note that product specifications and design may change without prior notice for the purpose of quality improvement.
lIf you have any comments regarding the product, please contact us using the contact information below.
2
. Disassemble Side Panels
Remove bolts on Side Panels.
Dimension
26 - 40 x 18 x 20"
40 - 71 x 18 x 20"
3
. Disassemble each Panel
Remove Shaft pin from lower
hinge and lift Side Panel
straight up to remove it.
Appropriate Dog Weight
Small dogs Up to 17.6 lbs.
4
Shaft pin
Materials
Steel, Elastomer
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795 Fax (972) 641-8495
www.richellusa.com
Visit us at
MADE IN VIETNAM