Safety Notes; Content Of Carton - Starblitz SHARK200 Manual De Usuario

EN

Safety Notes

 Do not use your flash in an environment where moisture or flammable vapour is
FR
likely to come in contact with the unit.
 A fire hazard exists if flammable materials are placed in close proximity to either
the flash tube or the modelling lamp when the unit is in use.
ES
 Do not restrict air vents while in use.
 Always switch off and disconnect from the main power before changing fuse, mo-
delling lamp or flash tube.
 Avoid placing cables where they can be tripped over. Protect from heavy, sharp ob-
ject or hot object, which may cause damage. Replace damaged cables immediately.
 Never use a unit with damaged covers, mouldings, flash tubes or modeling lamp.
If the unit is dropped or damaged in any way always have it checked out before using.
 Use a blower brush or clean facial tissue to remove dust and moisture from the
modelling lamp and the flash tube. Do not apply any fluids to the modelling lamp
and the flash tube.
 Turn the power off and unplug the power cord if the flash is not going to be used
for a while.
 Do not flash over 8 times in a minute at full.
 We recommend charging the flash unit for 2 hours prior to initial use and after an
extended period of inactivity (2 to 3 weeks).
 Due to the high voltage circuitry inside the unit, do not attempt to disassemble
the flash yourself.
 Keep out of reach of children.

Content of Carton

 110V-120V or 220-240V Flash unit with flash tube
 75W Modeling lamp
 Standard reflector (with or without standard reflector)
 Protective cover
 Power cable
 4.5V Sync cable
 User guide
2