Starblitz SHARK200 Manual De Usuario página 11

On the radio transmitter, the code from left to right is 1,2,3,4.
When you push the button to "ON", every code represents a value, channel 1 repre-
sents digit 1, channel 2 represents digit 2, channel 3 represents digit 4, channel 4
represents digit 8. When you push the button to "number side", the digit is 0. You
can calculate the total value according to the key's state. For example, when all the 4
buttons are set to "ON" side, the total value is 1+2+4+8=15. "15" is the channel code.
5. Group function
When Starblitz® SHARK studio flash at "Fx" menu, press slave button
switch to group setup menu "Gx".
There are totally 4 groups for your choice from Ga, Gb, Gc to Gd.
To use group function, you need to purchase separately a remote controller EX-801C.
Only when the studio flashes are at the same channel and same group as remote
controller EX-801C the studio flashes can be triggered.
Press once
Press
UP or DOWN
button to select proper
receiver channel
(Fig.1) once to
4
EN
FR
ES
9