MiLAN M 240 Guia Del Usuario página 89

Example: Input the data 25 ten times:
· The existing data can be viewed by means of
the cursor keys:
· To delete a data value, you should look for it
using the cursor keys and then key in
( ). Deleting a data value causes all following
values to be shifted up.
· When scrolling through data, the calculator
shows both the data item and a separate screen
for the data frequency (Freq) in the case you
introduced multiple entries of the same data
using
items of the same data values.
It is possible to replace a data value while scrol-
ling through data by entering the new value,
and then pressing the
old value with the new one. This also means
that if you want to carry out some other opera-
tion (e.g. execute a statistical calculation, etc.),
you should always press the
exit data display.
· After changing a value on the display, if you
press
value you input is registered as a new data item,
and the old value is leaved as it was.
25
(
( ) instead of the
(
) to specify the number
key to replace the
34
) 10 (
key first to
key, the
)