Omcan JE-ES-0015-F Manual De Instrucciones página 12

Maintenance
Remove the ejector.
For the models with head feeder: Take of the
turning feeder plate, by unscrewing the screw.
TOP/FAST TOP
Unscrew the five principal screws of the squeezing system parts.
Remove the two squeezing drums, the two male
parts and knifepiece pulling it outwards. Be careful
with this part, because of its cutting edge.
For the models with the upper feeder component,
twist softly the upper metal basket all the way
towards the left and then gently pull up. Remove
the turning dish by unscrewing the screw towards
the right.
Thoroughly clean all parts, and block of the machine with cold water and
detergent.
Do not use abrasive nor corrosive products, since they could harm the compound
of the elements of the machine. Do not clean the machine with water under
pressure.
Dry the components of the system and the block of the machine.
Assemble all the parts in reverse order. No tools are required to assemble or disassemble the machine. All
parts should fit with ease and without undue force.
For machines with self service tap, IMPORTANT: In order to ensure the perfect hygiene of your orange
squeezer, it is necessary to clean the tap periodically. Follow the instructions according to the diagram.
12