Safety; Intended Use; Security Instructions - Zipper ZI-BR3 Manual De Instrucciones

12

SAFETY

12.1

Intended Use

The ZIPPER brush cutter ZI-MOS145G shall only be used for mowing and trimming grass at
moderate and non-slippery terrain and for cutting twigs and hedges. Excellent with brushcutter
attachment ZI-BR3
Do not change the mowing attachment.
Using saw blades for the machine is prohibited!
Damaged cutting tools may be not straightened or welded in no case!
ZIPPER MASCHINEN cannot be held responsible for any injuries or damages if there was
performed manipulation or adjustments to the machine.
12.2

Security instructions

Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security instructions!
The locally applicable laws and regulations may specify the minimum age of the operator and
limit the use of this machine!
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-MOS145Gi 34
W A R N I N G
HIGHEST RISK OF INJURY!
Use the machine only in good enough light to allow a safe
operation can be guaranteed.
In tiredness, decreased concentration or under the influence of
alcohol or drugs, the work on the machine is prohibited!
Caution in slippery conditions - slip hazard - risk of injury. When
working, robust and non-slip footwear. Slides / stumble / traps are
a major cause of serious injury or death.
The machine may only be operated by trained personnel.
Unauthorized persons, especially children and not trained
personnel must be kept away from the running machine!
If you pass the machine to third, these instructions must be
attached to the machine.
Before each use, the reliability of the machine is to be checked
(tightness of the cutting tool, the proper function of the throttle
lever)
Danger of burns! During the operation flow of hot exhaust gases
and engine parts such as the carburettor and engine become hot.
Never place a hot brush cutter in dry grass or other easily
flammable materials.
After the operation, the machine must cool down. Otherwise there
is an imminent risk of burns
SAFETY
34