Preparing For Use; Basic Settings - Franke FS GLT Manual Del Usuario

Placa lightboard
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
EN

PREPARING FOR USE

Keep the display and keypad clean.
Z
X
The device is supplied with a battery that is only
partially charged.
Charge batteries fully before initial operation.
X
X
The initial charging takes approximately 8-10 hours.
Adapt the basic settings to your needs.
X
X

BASIC SETTINGS

Light settings
Turning on the light
Press
briefly.
X
X
The light turns on remembering the last
settings.
Light brightness gradient mode
Press
.
X
X
The brightness changes continuously.
If the desired brightness is achieved, press
X
X
again.
OPERATION
Switching on the scale
Ensure that there is no weight on the weighing
X
X
pan.
Press
briefly.
X
X
The display illuminates. All symbols appear on
the display.
After 2 seconds, the value 0 appears on the
display. The symbols
same time.
If necessary, press
X
X
Weighing
Put the weight on the weighing pan.
X
X
The weight value appears on the display when
it is stable.
and
appear at the
to zero.
FS GLT
If the lightboard will not be used in short time
Shut off the power supply.
X
X
If the low battery symbol appears on the upper
left corner
Recharge the batteries.
X
X
Only use the power adapter delivered by Franke to
X
X
recharge the batteries.
After long-period of non-utilization (> 1 year)
Charge the lithium batteries for about 12 hours
X
X
and check if they work.
If the lithium batteries do not work: Do not use
X
X
the appliance. Do not change the batteries. Do
not charge the batteries. Contact a Specialist.
Light color gradient mode
Press
.
X
X
The color changes continuously.
If the desired color is achieved, press
X
X
Turning off the light
Press
for 3 seconds.
X
X
The current setting of the lighting mode are
memorized. The light turns off.
Zeroing the scale
The weight on the weighing pan weighs less than 10%
of the max. capacity.
In stable mode, press
X
X
The value 0 and the symbol
display.
Taring
The weight on the weighing pan weighs more than or
exactly 10% of the max capacity.
Press
.
X
X
The symbol
Take off the weight from the pan.
X
X
– 6 –
again.
.
appear on the
appears.
Tabla de contenido
loading

Tabla de contenido