Kicker KMFC65 Manual Del Propietário página 5

When hard-wiring the RGB lighting, the black lead is +12V and the red, green, and blue leads are
ground. Splice and combine the ground wires to yield a different color. There are seven colors available,
depending on your wiring confi guration. KICKER recommends using the KMLC lighting controller (sold
separately) for more colors, patterns, and special effects.
Black : +12V
Red : Ground
Green : Ground
Blue : Ground
Transparent Blue : Speaker +
Transparent Gray : Speaker –
IMPORTANT SAFETY WARNING
Prolonged continuous operation of an amplifi er, speaker, or subwoofer in a distorted, clipped or over-
powered manner can cause your audio system to overheat, possibly catching fi re and resulting in serious
damage to your components and/or vehicle. Amplifi ers require up to 4 inches (10cm) open ventilation.
Subwoofers should be mounted with at least 1 inch (2.5cm) clearance between the front of the speaker and
any surface.
Note: KICKER Marine speakers meet or exceed industry standards for environmental humidity and
corrosion, and for material degradation due to UV exposure. All specifi cations and performance fi gures are
subject to change. Please visit www.kicker.com for the most current information.
Pro Tip: You are one KMA Amplifi er and a few cables away from a complete, high-quality system with
rock-solid bottom end as only available from KICKER! Please ask your dealer about KICKER KMA amplifi er
upgrades.
2A fuse
(max)
+12V
}
Ground
Color Combinations: Splice and
combine the ground wires to yield a
different color.
Red
Green
Blue
Red/Green
Red/Blue
Blue/Green
Red/Green/Blue
≤7"
(17.5cm)
12V
battery
Red
Green
Blue
Lime Green
Magenta
Aquamarine
Blue-White
5